259 lines
11 KiB
Python
259 lines
11 KiB
Python
#!/usr/bin/env python3
|
|
"""Generate KiCad 7 schematic (.kicad_sch) for the loop vehicle detector."""
|
|
import re, uuid, os
|
|
|
|
BASE = "/root/.openclaw/workspace/loop-detector/loop-detector-kicad"
|
|
SYM = os.path.join(BASE, "loopdet.kicad_sym")
|
|
SCH = os.path.join(BASE, "loop-detector.kicad_sch")
|
|
|
|
def uid():
|
|
return str(uuid.uuid4())
|
|
|
|
# ---------- extract lib_symbols from .kicad_sym ----------
|
|
data = open(SYM, encoding="utf-8").read()
|
|
# only extract TOP-LEVEL (symbol "X" ...) blocks: track paren depth while scanning
|
|
sym_blocks = []
|
|
pat = re.compile(r'\(symbol "([^"]+)"')
|
|
# find all matches, then filter to depth-1 (inside kicad_symbol_lib only)
|
|
depth = 0
|
|
top_starts = []
|
|
for m in pat.finditer(data):
|
|
# compute depth at match start by counting parens before it
|
|
prefix = data[:m.start()]
|
|
d = prefix.count('(') - prefix.count(')')
|
|
if d == 1: # directly inside kicad_symbol_lib
|
|
top_starts.append(m.start())
|
|
for start in top_starts:
|
|
depth = 0
|
|
j = start
|
|
while j < len(data):
|
|
if data[j] == '(':
|
|
depth += 1
|
|
elif data[j] == ')':
|
|
depth -= 1
|
|
if depth == 0:
|
|
break
|
|
j += 1
|
|
sym_blocks.append(data[start:j+1])
|
|
|
|
# embedded symbol names must carry the library prefix (e.g. "loopdet:C") so that
|
|
# lib_id "loopdet:C" resolves to the embedded definition without hitting the table
|
|
import re as _re
|
|
def _prefix(sym_block):
|
|
return _re.sub(r'\(symbol "([^"]+)"', r'(symbol "loopdet:\1"', sym_block, count=1)
|
|
lib_symbols = "(lib_symbols\n" + "\n".join(" " + _prefix(b) for b in sym_blocks) + "\n)\n"
|
|
|
|
# ---------- components ----------
|
|
# (lib, ref, value, x, y, rot, ref_at, val_at)
|
|
COMPONENTS = [
|
|
("CONN2", "J1", "CONN_2P", 40, 130, 0, (40, 136), (40, 124)),
|
|
("TVS_BI", "TVS1", "TVS_BIDI", 62, 130, 0, (62, 136), (62, 124)),
|
|
("XFMR", "T1", "1:1", 90, 130, 0, (90, 138), (90, 120)),
|
|
("C", "C1", "100~470p", 107, 130, 90, (113, 136), (113, 124)),
|
|
("Q_NPN", "Q1", "S9018", 130, 130, 0, (126.5, 136),(126.5, 124)),
|
|
("R", "Rc", "2.2k", 138, 126.19,0, (134.5, 132),(134.5, 120)),
|
|
("R", "Rb1", "100k", 124.92,121.5,90, (131, 121.5),(131, 117)),
|
|
("R", "Rb2", "47k", 124.92,137.5,90, (131, 137.5),(131, 133)),
|
|
("R", "Re", "1k", 132.54,139.5,90, (138.5, 139.5),(138.5, 135)),
|
|
("C", "C2", "100p", 138, 135.5, 90, (144, 135.5),(144, 131)),
|
|
("C", "Cc2", "10p", 148, 126.19,0, (148, 132), (148, 120)),
|
|
("COMP", "U1", "LM393", 170, 130, 0, (170, 137), (170, 123)),
|
|
("R", "R3", "10k", 150, 124, 90, (156, 124), (156, 119.5)),
|
|
("R", "R4", "10k", 150, 138.5, 90, (156, 138.5),(156, 134)),
|
|
("MCU", "MCU1", "STM32F103C8", 215, 130, 0, (215, 143), (215, 117)),
|
|
("R", "R5", "1k", 245, 124.92,0, (245, 131), (245, 119)),
|
|
("OPTO", "U2", "PC817", 265, 124.92,0, (265, 131), (265, 119)),
|
|
("MOS_N", "Q2", "N-MOS", 300, 126.19,0, (296.5, 132),(296.5, 120)),
|
|
("RELAY_SPDT","K1", "SPDT 12V", 325, 122.38,0, (325, 130), (325, 116)),
|
|
("R", "R6", "1k", 245, 130, 0, (245, 136), (245, 124)),
|
|
("LED", "D2", "LED", 280, 130, 0, (280, 136), (280, 124)),
|
|
]
|
|
|
|
# ---------- wires ----------
|
|
WIRES = [
|
|
# A net: J1.p1 - TVS1.p1 - T1.p1
|
|
((37.46, 127.46), (82.38, 127.46)),
|
|
((59.46, 127.46), (59.46, 130)),
|
|
# B net: J1.p2 - TVS1.p2 - T1.p2
|
|
((37.46, 132.54), (82.38, 132.54)),
|
|
((64.54, 132.54), (64.54, 130)),
|
|
# T1 sec upper: p3 - C1.p1 - base input
|
|
((97.62, 127.46), (110, 127.46)),
|
|
((110, 127.46), (110, 130)),
|
|
((110, 130), (124.92, 130)),
|
|
# T1 sec lower: p4 - C1.p2 - GND
|
|
((97.62, 132.54), (107, 132.54)),
|
|
((107, 132.54), (107, 145)),
|
|
# VCC bus
|
|
((100, 115), (320, 115)),
|
|
((140.54, 126.19), (140.54, 115)),
|
|
((124.92, 118.96), (124.92, 115)),
|
|
((150, 121.46), (150, 115)),
|
|
((317.38, 119.84), (317.38, 115)),
|
|
# GND bus
|
|
((100, 145), (340, 145)),
|
|
((124.92, 140.04), (124.92, 145)),
|
|
((132.54, 142.04), (132.54, 145)),
|
|
((138, 138.04), (138, 145)),
|
|
((257.38, 127.46), (257.38, 145)),
|
|
((302.54, 130), (302.54, 145)),
|
|
((282.54, 130), (282.54, 145)),
|
|
# base net
|
|
((124.92, 124.04), (124.92, 134.96)),
|
|
# collector net
|
|
((132.54, 126.19), (145.46, 126.19)),
|
|
((138, 126.19), (138, 132.96)),
|
|
# emitter
|
|
((132.54, 133.81), (132.54, 136.96)),
|
|
# comp in+
|
|
((150.54, 126.19), (162.38, 126.19)),
|
|
((162.38, 126.19), (162.38, 127.46)),
|
|
# vref
|
|
((150, 126.54), (150, 135.96)),
|
|
((150, 132.54), (162.38, 132.54)),
|
|
# comp out -> PA0
|
|
((177.62, 130), (177.62, 124.92)),
|
|
((177.62, 124.92), (202.3, 124.92)),
|
|
# PA1 -> R5
|
|
((227.7, 124.92), (242.46, 124.92)),
|
|
# R5 -> OPTO.1
|
|
((247.54, 124.92), (257.38, 124.92)),
|
|
((257.38, 124.92), (257.38, 122.38)),
|
|
# OPTO.4 -> gate
|
|
((272.62, 122.38), (294.92, 122.38)),
|
|
((294.92, 122.38), (294.92, 126.19)),
|
|
# drain -> K1.A2
|
|
((302.54, 122.38), (317.38, 122.38)),
|
|
((317.38, 122.38), (317.38, 124.92)),
|
|
# PA2 -> R6
|
|
((227.7, 130), (242.46, 130)),
|
|
# R6 -> D2.A
|
|
((247.54, 130), (277.46, 130)),
|
|
]
|
|
|
|
# ---------- net labels ----------
|
|
LABELS = [
|
|
("VCC", (100, 115), 0),
|
|
("GND", (100, 145), 0),
|
|
("VCC", (227.7, 135.08), 0),
|
|
("GND", (202.3, 135.08), 0),
|
|
("COM", (332.62, 122.38), 0),
|
|
("NO", (332.62, 117.3), 0),
|
|
("NC", (332.62, 127.46), 0),
|
|
]
|
|
|
|
# ---------- texts ----------
|
|
TEXTS = [
|
|
("环路车检器原理图 — LC 振荡 + 频率计数方案（推荐①）", (20, 20), 3.5),
|
|
("信号链：环形线圈 → T1 匹配变压器 → 考毕兹振荡 → 比较器整形 → MCU 测频判车 → 光耦隔离 → 继电器输出", (20, 30), 1.5),
|
|
("接路面环形线圈（3~5匝，双绞屏蔽线 ≤20m）", (20, 108), 1.27),
|
|
("→ 道闸控制器 / PLC 输入", (340, 114), 1.27),
|
|
("【设计说明】", (20, 165), 1.5),
|
|
("1) 线圈经 T1 匹配变压器隔离耦合，抗地环路干扰；", (20, 173), 1.27),
|
|
("2) 谐振频率 f0 ≈ 1/(2π√(L·C1))，建议 20~150kHz（待现场验证）；", (20, 181), 1.27),
|
|
("3) MCU 周期法测频（输入捕获），灵敏度阈值多档可调 + 回差防抖；", (20, 189), 1.27),
|
|
("4) 基准频率上电自学习 + 慢速跟踪，抗温漂（雨雪/昼夜温差）；", (20, 197), 1.27),
|
|
("5) 输出经光耦 U2 隔离驱动继电器 K1，防浪涌反灌烧 MCU；", (20, 205), 1.27),
|
|
("6) 软件加看门狗；继电器粘连/掉线检测；", (20, 213), 1.27),
|
|
("7) 电源：VIN 12~24V → 防反接 + TVS → LDO 5V → LDO 3.3V（本页未画出）；", (20, 221), 1.27),
|
|
("8) 相邻车道串扰：线圈间距 ≥1m，必要时交替频率；", (20, 229), 1.27),
|
|
("【关键参数（参考值，待现场验证）】", (240, 165), 1.5),
|
|
("C1: 100~470pF C2: 100pF", (240, 173), 1.27),
|
|
("Rb1: 100k Rb2: 47k", (240, 181), 1.27),
|
|
("Rc: 2.2k Re: 1k", (240, 189), 1.27),
|
|
("Q1: S9018/2N3904 Q2: N-MOS", (240, 197), 1.27),
|
|
("U1: LM393 比较器 U2: PC817 光耦", (240, 205), 1.27),
|
|
("K1: SPDT 12V/24V 继电器", (240, 213), 1.27),
|
|
("MCU: STM32F103/GD32F103", (240, 221), 1.27),
|
|
]
|
|
|
|
# ---------- build ----------
|
|
def fmt_xy(p):
|
|
return f"(xy {p[0]:g} {p[1]:g})"
|
|
|
|
parts = []
|
|
ROOT_UUID = uid()
|
|
parts.append("(kicad_sch")
|
|
parts.append(" (version 20230121)")
|
|
parts.append(' (generator eeschema)')
|
|
parts.append(f" (uuid {ROOT_UUID})")
|
|
parts.append(' (paper "A3")')
|
|
parts.append(" (title_block")
|
|
parts.append(' (title "Loop Vehicle Detector")')
|
|
parts.append(' (date "2026-08-21")')
|
|
parts.append(' (rev "1.0")')
|
|
parts.append(' (company "xde")')
|
|
parts.append(' (comment 1 "LC Oscillation + Frequency Counting")')
|
|
parts.append(" )")
|
|
parts.append("")
|
|
# lib_symbols (indent 2)
|
|
parts.append(lib_symbols.rstrip("\n"))
|
|
parts.append("")
|
|
# components
|
|
for lib, ref, value, x, y, rot, ref_at, val_at in COMPONENTS:
|
|
parts.append(" (symbol")
|
|
parts.append(f" (lib_id \"loopdet:{lib}\")")
|
|
parts.append(f" (at {x:g} {y:g} {rot})")
|
|
parts.append(" (unit 1)")
|
|
parts.append(" (in_bom yes)")
|
|
parts.append(" (on_board yes)")
|
|
parts.append(" (dnp no)")
|
|
parts.append(f" (uuid {uid()})")
|
|
parts.append(f" (property \"Reference\" \"{ref}\" (at {ref_at[0]:g} {ref_at[1]:g} 0) (effects (font (size 1.27 1.27)) (justify left)))")
|
|
parts.append(f" (property \"Value\" \"{value}\" (at {val_at[0]:g} {val_at[1]:g} 0) (effects (font (size 1.27 1.27)) (justify left)))")
|
|
parts.append(f" (property \"Footprint\" \"\" (at {x:g} {y:g} 0) (effects (font (size 1.27 1.27)) hide))")
|
|
parts.append(f" (property \"Datasheet\" \"\" (at {x:g} {y:g} 0) (effects (font (size 1.27 1.27)) hide))")
|
|
# pin uuids (number of pins depends on lib)
|
|
PINMAP = {
|
|
"R": ["1", "2"], "C": ["1", "2"], "TVS_BI": ["1", "2"], "LED": ["A", "K"],
|
|
"Q_NPN": ["B", "C", "E"], "MOS_N": ["G", "D", "S"],
|
|
"XFMR": ["1", "2", "3", "4"], "OPTO": ["1", "2", "4", "3"],
|
|
"COMP": ["+", "-", "OUT"],
|
|
"MCU": ["PA0", "GND", "PA1", "PA2", "VDD"],
|
|
"RELAY_SPDT": ["A1", "A2", "COM", "NO", "NC"],
|
|
"CONN2": ["1", "2"],
|
|
}
|
|
for pn in PINMAP[lib]:
|
|
parts.append(f" (pin \"{pn}\" (uuid {uid()}))")
|
|
parts.append(" (instances")
|
|
parts.append(" (project \"loop-detector\"")
|
|
parts.append(f" (path \"/{ROOT_UUID}\"")
|
|
parts.append(f" (reference \"{ref}\") (unit 1)")
|
|
parts.append(" )")
|
|
parts.append(" )")
|
|
parts.append(" )")
|
|
parts.append(" )")
|
|
parts.append("")
|
|
# wires
|
|
for p1, p2 in WIRES:
|
|
parts.append(" (wire")
|
|
parts.append(f" (pts {fmt_xy(p1)} {fmt_xy(p2)})")
|
|
parts.append(" (stroke (width 0) (type default))")
|
|
parts.append(f" (uuid {uid()})")
|
|
parts.append(" )")
|
|
parts.append("")
|
|
# net labels
|
|
for name, pos, ang in LABELS:
|
|
parts.append(" (label")
|
|
parts.append(f" \"{name}\" (at {pos[0]:g} {pos[1]:g} {ang})")
|
|
parts.append(" (effects (font (size 1.27 1.27)) (justify left bottom))")
|
|
parts.append(f" (uuid {uid()})")
|
|
parts.append(" )")
|
|
parts.append("")
|
|
# texts
|
|
for s, pos, size in TEXTS:
|
|
parts.append(" (text")
|
|
parts.append(f" \"{s}\" (at {pos[0]:g} {pos[1]:g} 0)")
|
|
parts.append(f" (effects (font (size {size:g} {size:g})))")
|
|
parts.append(f" (uuid {uid()})")
|
|
parts.append(" )")
|
|
parts.append("")
|
|
parts.append(" (sheet_instances")
|
|
parts.append(' (path "/" (page "1"))')
|
|
parts.append(" )")
|
|
parts.append(")")
|
|
|
|
out = "\n".join(parts) + "\n"
|
|
open(SCH, "w", encoding="utf-8").write(out)
|
|
print("wrote", SCH, len(out), "bytes")
|